can vanity sink offset use 90degree bend out of wall?

Users who are viewing this thread

flazoom

New Member
Messages
22
Reaction score
0
Points
0
Location
South Florida
I am installing a double sink vanity in my master bath. The new sink drains no longer line up with the waste pipe in the wall. Can I use a 990 degree bend coming out of the wall to route the drain line along the back of the vanity and have the ptrap face towards the back as well? I know I can use a 45 degree bend to take care of the offset, but I would like to have as much usable space under the sinks as possible.
 

Winslow

Plumber
Messages
445
Reaction score
0
Points
0
Location
Hawaii
whatever works as long as you use drainage fittings, not vent fittings

lav_rough_1.jpg
 
Last edited by a moderator:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks