Brady air volume control valve for jet pump

Users who are viewing this thread

Traveller

Member
Messages
75
Reaction score
0
Points
6
Location
British Columbia
For the AVC used on shallow wells with jet pumps, and mounted on bladderless tanks to maintain air volume in these tanks, where on the jet pump does the tubing from the AVC connect to?
 

Texas Wellman

In the Trades
Messages
1,035
Reaction score
59
Points
48
Location
SE Texas-Coastal
There should be a fitting on the suction port. Depends on the pump on where it it is. Usually a 1/4 or 1/8" plug near the bottom or on the back.
 

Traveller

Member
Messages
75
Reaction score
0
Points
6
Location
British Columbia
Looking at this image

9215025_L.jpg


do you mean either one of those two little plugs out near the nose of the 1.25 inch intake horn?
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks