Hi guys, I'm working on my basement bathroom and need some advice on how to vent the shower, toilet and sink.
There is no vent line within reach but there is a 3" vertical Sani vent from the second floor above and I was wondering if I can tie into that?
If so what would that look like? I've attached a sketch of what I think it should be but feel free to mark it up !
Red = existing Sani line from 2nd floor
Blue = new Sani line from shower, toilet and sink
Green = new vent line in walls
Note:
- concrete slab is about 3 - 4" thick
- the existing clean out will have to be moved as the shower drain is too close to keep it there.
thanks for your help!
Kevin
There is no vent line within reach but there is a 3" vertical Sani vent from the second floor above and I was wondering if I can tie into that?
If so what would that look like? I've attached a sketch of what I think it should be but feel free to mark it up !
Red = existing Sani line from 2nd floor
Blue = new Sani line from shower, toilet and sink
Green = new vent line in walls
Note:
- concrete slab is about 3 - 4" thick
- the existing clean out will have to be moved as the shower drain is too close to keep it there.
thanks for your help!
Kevin