Autotrol 255 air check

Users who are viewing this thread

Dan1234567

New Member
Messages
2
Reaction score
0
Points
1
Location
Indiana
The ball in the air check valve is stuck at the bottom. I removed the glass, cleaned the ball and glass and reinstalled. It drew brine one time and now it’s stuck at the bottom again.
I’ve checked the screen and injector and both are okay. I purged air from the system so I don’t think it’s an air issue. Could ball need replaced? Any suggestions are appreciated.
Thanks
 

Reach4

Well-Known Member
Messages
38,797
Reaction score
4,412
Points
113
Location
IL
Is there brine in the tank to be drawn into the glass during brine draw? So does the brine ride high in the brine tank limited by the safety float?
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks