Another soldering question

Users who are viewing this thread

White Tiger

New Member
Messages
29
Reaction score
0
Points
0
Is soldering brass to copper the same teqnique as copper to copper ? Also what is the best solder and flux to use and propane or Mapp gas. Thanks for the info, your site is the best for the do-it yourselfer.:confused:
 

Dunbar Plumbing

Master Plumber
Messages
2,920
Reaction score
10
Points
0
Location
Northern Kentucky/Greater Cincinnati Area
Website
www.KoldBreeze.com
Applying more heat to the brass fitting is usually required; make sure the solder goes completely around.

I use tinning flux for best results.

I use Bridgit solder or Oatey lead-free.

soldering_kit.jpg
 
Last edited by a moderator:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks