Affordable bidet compatible with Toto's dynamax tornado toilets?

Users who are viewing this thread

ShadowTitan

New Member
Messages
4
Reaction score
0
Points
1
Location
California
This website is so great! Wealth of information here.

I replaced a 3 gallon toilet in my parents' home this past month with the new Toto drake with dynamax tornado technology. They had a Luxe bidet neo 120 that fit their old toilet just fine. However I am finding that the bidet is not compatible with the new Toto dynamax tornado flush system. The spigot does not have enough room when it extends downward and the spigot itself interferes with the spiral flush in the rear of the bowl.

My folks are looking to replace the Luxe bidet, but I have no idea what would fit the newer Toto unconventional bowls for under $50. The Toto branded bidets are upwards of $200+. Does anyone have any experience with affordable bidets that would fit the newer Toto tornado bowls? Thank you!

https://luxebidet.com/product/neo-120-bidet-attachment/
link added by admin

Luxe Bidet Neo 320 - Self Cleaning Dual Nozzle - Hot and Cold Water Non-Electric Mechanical Bidet Toilet Attachment (blue and white)

120_white_01-600x600.jpg
 
Last edited by a moderator:

Reach4

Well-Known Member
Messages
38,798
Reaction score
4,412
Points
113
Location
IL
I have the Joy Bidet C2-SC https://joybidet.com/ which is probably similar.

Its spray nozzle clears my toilet, but I think you are implying that the Dynamax Drake has a bowl that slopes toward the water spot more than most toilets.

Did you slide the mount away from the rear to the max? My mount is not near the max.
 
Last edited:

ShadowTitan

New Member
Messages
4
Reaction score
0
Points
1
Location
California
I have the Joy Bidet C2-SC https://joybidet.com/ which is probably similar.

Its spray nozzle clears my toilet, but I think you are implying that the Dynamax Drake has a bowl that slopes toward the water spot more than most toilets.

Did you slide the mount away from the rear to the max? My mount is not near the max.
I have the Joy Bidet C2-SC https://joybidet.com/ which is probably similar.

Its spray nozzle clears my toilet, but I think you are implying that the Dynamax Drake has a bowl that slopes toward the water spot more than most toilets.

Did you slide the mount away from the rear to the max? My mount is not near the max.

Thank you for replying!

What toilet is your joy bidet installed on?

This video is the exact toilet I installed for my parents. I tried moving the bidet maximum forward position. It technically "installs" without difficulty, but the spigot extends and hits the bowl when the bidet is turned on. It therefore does not clear the plastic covering because it doesn't extend down far enough. Secondly when I flush the bowl, the rear water outlet in the tornado flush actually hits the bidet spigot itself. If you look at the video standing in front of the toilet and facing the toilet, the water that comes out of the 2 o clock outlet smacks right into the bidet spigot, effectively ruining the tornado flush effect.

I hope I'm explaining myself clearly.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks