Adding laundry tub next to washer

Users who are viewing this thread

IanH

New Member
Messages
2
Reaction score
0
Points
1
Location
Colorado
First time posting. I have done quite a bit of Googling, but I would really appreciate expert opinions. The attached pdf shows a pretty accurate scale drawing of what I want to do. Because of the existing setup, in our recently purchased house, the tub has to go to the left of the washer and the washer can't easily be moved. I put a few notes on the drawing to explain what is what.

Thanks in advance for any and all help.
Ian
 

Attachments

  • Plumbing_1.pdf
    173.8 KB · Views: 298

Reach4

Well-Known Member
Messages
38,796
Reaction score
4,412
Points
113
Location
IL
That connection off of the standpipe trap arm is probably already a santee.

The new fitting where you convert from horizontal to vertical will be 2 x 2 x 1.5, which you probably already intended.

I am not a pro, but it looks good otherwise.

IMG_4.png
 

IanH

New Member
Messages
2
Reaction score
0
Points
1
Location
Colorado
Reach 4,

Actually the existing plumbing is as drawn. I will replace the wye+45 with a santee when I do the rest. Thanks for the input.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks