well pump issues

  1. C

    Deep Well Submersed Pump cycles 30 sec on/2 min off (240v on pump throughout cycle) repeating until pressure switch limit (60psi) is reached

    When pressure switch demands water, deep well turns on, runs for 30 seconds and turns off for 2 to 2-1/2 minutes. It repeats this cycle several times until water pressure reaches the shutoff limit (60 psi). 240v pressure switch is closed throughout this cycle (never opening) and 240v is going...
  2. H

    Bad contact at pressure switch?

    About two weeks ago, my 3-year-old well pump stopped working during the day. After hours of troubleshooting (more like diagnosing) and one technician later, we temporarily fixed the problem by pulling up the cable going down the well maybe about 6 inches and fixing it at that height with zip...
  3. Mac McMahon

    Irrigation well pump somethings doesn't pump water when cut in pressure low.

    This past week I noticed my irrigation system runs when first started. During the zone 1 water pressure drops and the sprinkler head stop spitting out water. I looked at the pressure gauge at shows 0 pressure. About 60 seconds later I hear water filling tank and sprinkler has water coming out...
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks