toto

TOTO Supreme toilet in a 1.28 gallon here with the low sitting position and the low tank that easily fits under a banjo top. This is the elongated version. It also has a round bowl version. TOTO Supreme The recent ones are coming with the flush tower.

Long-time lurker, first-time poster Anybody think it'd be possible to convert a regular Toto Aimes toilet into one with a WASHLET+ connection? Can I drill a hole and make it work? Toilet: https://www.totousa.com/aimes-one-piece-toilet-128gpf-elongated-bowl w/WASHLET+...

I just purchased a loft condo and the toilets are pretty old and in need of replacement. I would like to replace a Mansfield 160 with a Toto Drake II or Ultramax II. The Mansfield bolts are 11" from the wall. Is is possible to fit either the Drake or Ultramax? Specs show both with 3/4" space...

Bought Toto years ago after the good reviews I saw but now everything seems discontinued/out of stock for my model. I replaced the bowl maybe 2 years ago due to mineral deposits requiring re-flushes. I chiseled 1/4"+ thick deposits out of the trap at first and it helped for awhile, then when...

Hi, I am installing a wall hung toilet in my basement. The existing main stack is several feet away. To install the toilet where I'd like, the toilet drain will need to run horizontal (nominal fall) to the main stack. Question is, will the toilet flush properly with the drain exiting the...

I have a small 2nd bath. 14 inch rough out. Depth has to be 28 or less. Will the cadet work? Do we have to have special parts to account for the 14 inch?? All the info shows that cadet is 12 inch. Thank you.

TOTO CST714-01 Carusoe toilet with washdown flush. One of the early TOTO toilets before they went with the siphon jet flushing system. This is an old style wash down bowl. They had the ballcock that didn't need the fill tube into the overflow.

TOTO has the new K300 Washlet out now. • Gentle aerated, warm water, dual action spray with oscillating feature • Adjustable water temperature and volume • Instant water heating system for continuous warm water and energy saving • Warm air drying with three variable temperature settings •...

I'm in process of replacing 30 year old toilets in my home. I started with one of them and hit an issue with shut off value. The shut off value is almost right behind the toilet (see picture new_toilet). With my new Toto toilet, we had to angle the toilet a little bit to avoid breaking the...

We have what was originally an Ultimate, purchased ~15 years ago, that's had its valve and flapper replaced with the Gmax versions over the years. Most recently, the valve started leaking instead of fully shutting off. This was a TSU18A from 2012 (I started ordering parts online before they...

Hi everyone, we're doing a gut bath renovation and have discovered that the distance between finished wall and center of flange is 11.5". I've done as much math and homework as possible to figure out what's best but, being a total novice, have a few final questions. Please help! I've read a...

I've found plenty of information on matching Toto, Kohler, and American Standard whites. Unfortunately, I've fallen in love with a Whitehaus pedestal sink and wonder which of the Toto whites would go best, if not match? Thanks for any help you can give!

Hi there, first post and very appreciative of all the info on here. Have gutted out my bathroom and chosen the Aquia wall hung. My condo is 4 feet below grade, on slab on grade, and so I am securing my framing for this to a block wall which should be even more secure than to typical framing (I...

Here's a video I made of the chugging in my pipes after I flush my Toto Drake ST743S toilet and the tank fills. I've replaced the flapper and the flush valve (as suggested on another thread on this site), but it hasn't fixed it. Here's the video, watch the whole thing a little over 3 minutes...

I tried to install a used american standard toilet into my new house from my old house that worked fine, but the horn is about 3.25in wide and the opening of the pipe in the flange is 3 in. What should I do? I was thinking one of two things: Buy a new toilet (probably upgrade to a Toto) Or...

So, I am starting a overhaul of my bathrooms. I have been eyeing the Toto Aquia wall hung due to space saving. Reading forums the Maris is not necessarily "male" friendly because of the curve of the bowl. They do have a 3rd option, the MH wall hung. Can't find any hard reviews on it and not...

Hi, I currently have in my home these Sterling 402081 (elongated) installed by the builder, which are absolutely horrible at flushing: https://resources.kohler.com/plumbing/sterling/pdf/1110492_4.pdf I would like to get them replaced with the Toto Drake CST744S (also elongated). My only concern...

To start, I'd like to thank Terry and all of the contributors here - this site is where I've learned the majority of my (limited) plumbing skills over the years. Here's my problem: I just replaced two Sterling toilets with Toto Ultramaxs. While I like the look, and the fit is perfect, I'm...

This Forum has been such a help. Struggling with figuring out what to do about 14" rough ins on 1950 slab construction house. I replaced the toilets when I purchased the house in 2002 and I think I got the last 14" American standards as I have elongated bowl and under 29" lip to wall. Looking...

The G400 by TOTO is their entry level Neorest style toilet that combines the Washlet with the bowl. A dual flush unit, 1.28 GPF or 0.9 GPF. The seat auto opens and closes, warm seat, warm water wash and warm air dry. It's pretty nice. Power is 120V AC, 60Hz, 409W It also has Water Premist™ of...