toto

Hello! I’m trying to select a reliable, don’t-ever-have-to-think-about-it-again toilet for a small powder room. 10 inch rough in Total depth of the room is 47 inches. I know that all reviews are in favor of Toto, but doesn’t seem like there’s a model that’s short enough to fit this space…...

My bathroom is undergoing a remodel and I'm hoping to replace my current Toto Drake toilet with an identical one in a different color (we have bone and the new one needs to be white). I know that it is a two-piece Toto toilet with a Tank Model Number of ST743S #03. I can't seem to figure out...

TOTO Vespin CST764SG 1.60 GPF toilet with the skirted bowl that comes with a 12" Unifit and can also use the 10" and 14" CST764S and CST764SG https://terrylove.com/pdf/CST764SG.pdf

We just moved into a house with a Toto toilet in the ensuite. On moving in the bowl was FILTHY - once we cleaned it up we realized that it's because the bowl only holds a small amount of water in the very bottom where it drains. To clarify, 3-4 sheets of toilet paper is enough to absorb it...

Hi, I tired using the search function but didn't find anything directly on point. I did not go back way far, but nothing obvious. Anyway, have questions on Toto, and the Washlet/Washlet+ and G400, first will describe my situation: - remodeling bathroom, so can pretty much do anything if...

I need to replace the toilet in our powder room. It's our only toilet on the main floor so it gets used frequently. I did a lot of comparison research and narrowed it down to 2. Looking for a final recommendation. My top priorities are #1 - no clogging #2 - easy cleaning/stays clean (interior...

Toto is going to be the end of me! Finally narrowed things down to the toilet I want and the Washlet I want - both are Washlet+ so should be a breeze, right? Well turns out for the recent S500/550e series they moved from T20 to T40, aka the hole is now slightly lower than it used to be. Of...

Hi, I have a Toto Nexus 1-piece toilets and a Toto Carlyle II 1-piece toilet, both with the 'standard' soft close seat. They are both elongated bowls. My wife complains about cleaning the underside of the seat, which is basically just the curved top part that you sit on, with four 'feet'...

I am looking for advice on how to make a Toto toilet with the semigloss finish, which has already been damaged by using abrasive cleaners, look better. We have very hard water and I am afraid I didn't understand the semigloss finish and have damaged it over the years. Most of the posts here are...

I’m in the process of redoing my hall bath upstairs and have the tiles in and soon to be grouted so I’m on to the toilet. Based on the advice of the forum two of my other newer toilets are both Ultramax 1.6. This is a small 8x5 bath so I didn’t want to go with the elongated bowl as it makes...

I recently picked up a 1.28GPF Toto Entrada that uses the e max system. Upon first fill I noticed the fill tube wasn't placed in the overflow , cool easy fix. Although it's much better it still seems awfully low. If I add water manually it fills up quite a bit more until it reaches the internal...

First post, so excuse me if this has been covered elsewhere, but I am in the process of deciding which toilets to install in a new home for my family and I am ready to pull the trigger on the Toto Drake II (C454CUFG-01). However, I am concerned about the disinfecting limitations (using only Dawn...

Have decided to go with a Toto Vespin II connect plus and with a 14” unifit adapter and a S350e washlet. Now just looking at tank options and need help deciding. Considering either the ST453U 1 gallon tank or the 1.28 gallon ST454E tank. apart from their capacities, I see the 1 gallon tank is...

I've recently installed a Toto Drake 1.28/0.8 dual flush (bowl: CT746CUFG.10#01; tank: ST746EMA#01). Since we have hard water, I'd like to use something to try to reduce hard water deposits. I noticed that the tube from the fill valve to the overflow tube is actually positioned so that it drips...

I bought a Toto Drake 10" dual flush toilet. I noticed this hole on the right side of the bowl, with a sticker over it. What's the purpose of this hole? Also, should I remove the sticker now while it's easy, before it starts to yellow and peel? Thank you for any information.

Hi Terry (and community), I bought a Toto Aquia II a couple of years ago and just got around to installing it (bathroom remodel taking a long time, but hey, we're staying at home a lot more now, so I have time to work on it - my wife says I should have hired a plumber; she's probably right)...

I have a Toto Drake that is about 10 years old. The top of the flapper that secures the chain broke. I went to Home Depot and picked out a Korky replacement that was the same size as the old flapper. I installed it and now every now and then it doesn't seal and the toilet runs until I take...

Hello! I have a Toto skirted toilet, the kind where the seat is bolted on with expansion bolts in a rubber plug. I noticed the seat swiveling on one bolt. Turns out the head snapped clean off the other bolt, and now I can see the headless bolt, secure in its rubber plug. How can I remove it?

I've read plenty of reviews about the Drake II. I went to the Toto website ans poked around and of course was enthused about the various options. In a nut shell I thought the Tornado 3D would be better than the Tornado flush system. So I ordered the Connelly from a local big-box. Then I looked...

I guess this is too new to show up on the list of good toilets. Does anyone have experience with the model, good or bad? Thanks https://terrylove.com/forums/index.php?threads/anyone-have-an-opinion-on-new-toto-drake-2-piece-1-6-toilets.85116/#post-612091