rough-in valve

  1. E

    Need help identifying a shower valve

    Trying to identify a shower valve from a 23 year old home in West Vancouver. The trim is branded Delta Select, but the valve does not match anything I have seen, and I've spent hours looking on the web, as well as consulting local plumbing shops. The rough in valve does not appear to be Delta...
  2. Gallo Machisimo

    Bathtub rough-in, 8" centers with offset spout

    Hello good people! I hope you're all doing well. So after you guys helped me to get my Case 3000 toilet issues fixed, I'm hoping you can help me with my next vintage plumbing issue. I'm in the process of having a new shower stall put in my master bathroom. That has sent us down a rabbit...
  3. TAnderson007

    Shower Rough-in valve and integral stop

    Can I replace an integral stop with cap? Stop is broken and may be part closed, reduced pressure in hot water. Supply line was replaced and is clear. Nut is 7/16" and we don't need a shutoff at the tub/shower. Cold water pressure is fine.
  4. mritterjr

    No Hot Water

    I am remodeling our hall bathroom and replaced the plumbing in the same configuration it was in before, with the exception of adding shutoffs to the shower in the basement. I roughed-in the Delta Multi Choice shower valve, with tub spout, and everything in the new bath works fine upon testing...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks