modcon

  1. Mike Drew

    Help Troubleshoot Monoflo ModCon Retrofit

    Hello! Apologies in advance for the long post, and thank you so much for any help provided! My home has 10 main floor radiators and 1 basement radiator, all cast iron and all fed by a monoflo system. We just had an old 1940's radiator (roughly similar to this one) replaced by a Navien NHB-80...
  2. amazer98

    After ModCon Boiler install, should I upgrade baseboards?

    Hi All, I'm new to this forum and have a question I was hoping you could answer. Six years ago my wife and I moved into this 1600sf condo in Maine. The heating system was an oil-fired boiler that fed into 4 zones-- one zone for each of the two bedrooms, one zone for the entire common area...
  3. Ki23

    Tri-level replacement

    Good morning all, I've been reading these forums for weeks and getting great information from them. My situation is a little different as I have a 1978 tri-level house that has a furnace on the second floor only so we can remove that from the equation, I believe. I know how many therms I used...
  4. tropostudio

    (Yet another) Boiler Sizing Question

    This is a great resource and a great forum. I'm a couple weeks away from starting into a major renovation on our 1915 bungalow in St. Paul, MN. It's currently a 1-1/2 story and we have opted to top the house and add a full second story. Drawings and spec are done, and we have a contractor on...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks