lake pump

I’m going to be installing a 3/4 hour submersible in a lake. I have a pump shed down at the water that used to house the old jet pump and pressure tank. The shed has power, and can be heated, but through the winter is expensive. The house is 70 ft uphill from the lake. Ideally I’d run a new wire...

Just installed a well pump in the lake this weekend. It's in a 4" PVC sleeve/stand. I have to remove the pump before next winter and I'm guessing i should store it indoors or any remaining water will freeze and destroy the pump. Cutting and re-splicing the wires every year seems tedious and...

Hey everyone! I'm planning to change some of the current water system at the lake in the spring, so I'm gathering as much info as I can to hit the ground running when the snow and ice are gone. I'm at Last Mountain Lake in Saskatchewan. The cottage is on the shore, 10-ish feet above the water...

The run is about 500’, and elevation 50’. I would like a min of 10gpm. What kind of pump could be best for this, and would a deep well pump work? Thanks