k-8304

I’m planning to swap out an 8300 Rite-temp valve that is currently roughed in from previous plumber. It was set up for shower head only with bottom port capped off. (Was told would not work for what I want to do) Have a K-11748-KS main valve with tub diverter and service stops - shower stall...

I am having issues with temperature not getting hot enough and pressure not nearly where it should be. I have replaced the mixer valve (GP800881) and still the issue remains. I have now ordered the Rite-Temp®Test cap for K-8300 series valve bodies...

I am attempting to replace the handle, faceplate, etc. on my Kohler tub/shower kit without replacing the temp valve. Currently installed is a K-304 valve, but the new handle is set for the K-8304 valve - threads do not line up. Are there conversion kits to help? Or is a complete replacement of...

I just bought a Kohler shower tub faucet with the rite temp valve k-8304. when I originally installed it it had a PEX to shower head dog ear elbow. copper to dog ear copper stub for the tub spout. I tested and it worked well. now after installing shower head and tub spout the shower head drips...

Kohler has a new valve in the Rite-Temp series. It should be much easier to install now, as it backs to a standard 2x4 in a 2x4 stud wall. Like Moen and Delta, now Kohler can be installed using the same setbacks. Life is going to be easier for plumbers. :) K-8304 Water goes in where the...