frost free spigot

Need some advice. I went to replace my frost-free spigot and when I went to turn outside it just spun. At the time I did not have inside access, now I do and have attached a photo. I see CPVC to an elbow with an adapter I believe. Is my best option to cut above the elbow use a coupler and a...

House has a frost free sillcock that is leaky. Quite a bit of corrosion as I believe it is original with the house (70's construction). I am a little unsure of the quality on some of the new stuff. I would rather buy a nicer model if it will last like this original one did, and, if I have a...

We have been carrying buckets of hot water down from our house to our kennel with 40 sled dogs for ten years. The time has come to bring water to the barn. The building is 12x24 well insulated and will be used on a daily basis. I built this last fall and heated it through the winter with a...

Hello, I currently have an Arrowhead 420 series frost free sillcock faucet on my house. I'm located in MN. I have the faucets hooked up to timers to water my gardens with low pressure irrigation. As a result, I have to leave the faucet handles turned on all summer. Last year I had to replace...

Is this repairable? What would have caused this kind of break? It's only about a foot below grade, so any water should have drained out the bottom before freezing. How would you DIY this one? I'd love to forgo digging another 7' through clay and roots to replace this. Thanks! TSwampy

I have a frost free spigot with a damaged plunger part that is causing water to leak out the drain hole when the spigot is shut off. It's the cylinder located inside the handle. Does anybody know what this part is called and if it can be replaced? Thanks. https://ibb.co/bxnSQ6