fleck2510

New home in San Jose. Water tested as: 22 grains per gallon of hardness 390 Total dissolve solids 1mg/L chlorine 38psi Very low pressure, and house has a 1.5" inlet loop, as seen here, from a previous owner. Fleck comes highly recommended by this forum, and I agree it looks like a good...

Hi there, I recently had my water softener valve and resin replaced. The new valve is a 2510sxt, and the resin is 10% crosslinked, 1 cubic foot in size. I live in Houston, TX, with city water and no iron content. My current measurements are: Hardness: 14 BLFC: 0.5 - 1.5 lb salt per minute...

Hi there - I thought I understood the Fleck system when I got it from Amazon, but I'm a little confused now. I got the combo iron filter and water softener because I got a good deal on it opposed to just the filter. I know I need to filter iron but I don't think I have hard water (I'm in the...

Hello, I had my water tested and my results are below. There are four people in my family. The water is acidic, there is sediment from my well and fortunately, there is no bacteria in my well. I also did a test on Radon in my well and the results showed there was a level of 1,952 pCi/L (EPA...