discharge line

I live in a very rural area where there are almost zero reliable contractors/plumbers. Almost everyone I’ve hired over the last three years, I’ve had to redo some (or all) of their work. So I’ve relied on forums like this (THANK YOU!) and hundreds of hours of research to try and find decent...

I have an open loop geothermal system that takes water from a deep well in the front yard of my home and discharges it into a pond located on the property. I also have a deep well installed at the pond which is used only to supplement the pond's water level (both wells tap into the same...

I am swapping a 20gal tank from my 14gal unit, which requires a slightly longer discharge line. Since it needs to bend/flexible, can I get by with reinforced/braided vinyl (plasticized polyvinyl chloride) rated for 125psi? (1" ID with 1-3/8" OD) My thought was to replace the single hose clamp...

I have to run a discharge line from a sewage ejector to a septic tank. About 20' of this is vertically up a stone bluff and I'm looking for freeze-prevention ideas? And advice? I'm hoping to avoid building an insulated box, but not sure what would be best. I don't think heat tape or that sort of...