city water

  1. Evan K

    Increase City Water PSI

    Hello All I've recently done a whole bathroom renovation and installed 6 body sprays. In order to get 2gpm out of each head they require 80 psi. The good people at Moen failed to mention that when i had them help me pick out the pieces for my bathroom remodel. I have about 60 psi with...
  2. Tracey J Brown

    Costs of tapping into City Water

    Hello- We just purchased a new construction 3000 sq. ft. 4 bedroom, 4 bath home with a well and septic. The well has had some issues with high coliform and in the past tested positive for E.coli. It's been flushed a few times and is now negative, but because it shows other high levels, nitrates...
  3. Tim Beck

    Irrigation Pump

    I just purchased a home with an in-ground irrigation system. I noticed an unusual plumbing setup and can't make much sense of it. The water main (city water) enters the basement below ground on the north side, and I can follow the copper pipes to a spigot outside the north wall. On the south...
  4. equips4o

    Well water to city water conversion question?

    Hey guys, I live in Sarasota, FL and the city is just finishing up plumbing my neighborhood with city water. I am planning on connecting my house to city water so that i avoid the maintenance of the well and the occasional sulfur smell from the well water. The city has so far installed a water...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks