cartridge

Hey all! I have a new D210000BT Tub filler valve shown here For some reason when the hot water side is shut off some water still runs out of the faucet. Not just drips out but runs out like it is not closed all the way. So I thought, "New Cartridge!" So as a temp fix so I could turn on my hot...

Hi everyone, Homeowner in distress here. I have two questions: I am trying to remove the cartridge that is stuck in the handle (see picture). How can I remove it without breaking it? How can I find a new handle that would be compatible with this particular type of cartridge? I am trying to keep...

Hey guys, I just recently replaced the trim on one of my showers that had an American Standard A954440-0070AP cartridge and the install went great. But when I pulled the trim off my other shower I realized even though the hardware was American standard it was a different type of cartridge. I...

Hi folks, I have a single shower mixing valve that doesn't mix any longer. I've removed the cartridge but can't identify it. Been to 2 plumbing supply stores and no luck there either. Going through previous posts, it looks like a Sayco or a Aquabrass cartridge to me but I'm not sure and I...

Hi folks, I have a single shower mixing valve that doesn't mix any longer. I've removed the cartridge but can't identify it. Been to 2 plumbing supply stores and no luck there either. Going through previous posts, it looks like a Sayco or a Aquabrass cartridge to me but I'm not sure and I...

i just bought a new cartridge for my tub, delta 1300/1400 series. I took the old one out & replaced it with the new one only thing is when the new one is placed water doesn’t come out of it at all. I took it out put the old one back in just to be sure boing was wrong with my line & the old one...

I am in the process of building a home and just installed new delta shower mixers. One shower is near my pressure tank and has two shower heads on opposite walls. When the test caps were on I had ample pressure throughout the house as the well and 60 gal pressure tank are set to 60psi. Then when...

I've been experiencing water dripping from a shower head (like rain) for a week and I finally replaced the cartridge for my shower faucet. The cartridge model for the shower faucet is "Gerber Single Lever Cartridge G0095154". Unfortunately this still didn't resolve the issue and water is still...

Hey! Love the forum! I need help Identifying this valve. The plumber said it was a Delta, but at the plumbers supply store, they said it wasn't (Plus they didn't have the replacement) I want to replace it because it's leaking and also get a new trim and handle. Any help? I appreciate it!

Hello, have a small sink in a half-bath on my first floor -- no hot water, only cold. I am trying to replace the cartridge, and this is what it looks like when I take it apart -- at this point, I'm uncertain and can't find a YouTube video that looks like mine. Do I need a tool that fits inside...

In florida, picked this faucet out when i was about 5. Its just now starting to leak out the top. The thing is I have never seen another faucet like it, and cannot find a new cartridge for it. Could someonr help me identify the brand? If it helps any the unit was a display model. Pics attatched.

Hi, been searching for a while for this one, all expertise will be greatly appreciated. I know its a valley, at least i hope i do. However the issue is that i cannot find the exact match where the little notch on top is parallel with the two holes on the bottom. Please see attached files. Thanks

I live in a condo that was built in 1995 and this is the original bath valve. The faucet has an intermittent drip so I am wondering if replacing the cartridge will fix it. I just replaced the faucet because the diverter broke and had my fingers crossed that it might miraculously stop the drip...

I need to replace the 1/4 turn ceramic cartridge on this bathroom faucet. I easily removed the handle that is fastened with two small allen screws. There are no wrench flats to unscrew the escutcheon and its bell shape will not allow any kind of tool to be used. I have tried to unscrew it with...

I have a leaking spigot controlled by a push pull Moen valve I'm trying to identify the model of the cartridge replacement Can you tell by looking at the pics below or advize how to identify the replacement needed. Thanks for your help

I recently replaced a Moen cartridge in an old single handle faucet. (Moen part number #1220). It is working fine with the exception that sometimes it does not shut off completely - almost like the handle doesn't get the cartridge stem all the way back down. Other times it works fine. I'm...

A DIYer here with a question about replacing a leaking cartridge in a Dornbracht ‘Madison’ single-hole faucet. I’ve got the replacement cartridge but I can’t find disassembly instructions for the faucet anywhere online. I’ll appreciate any expert guidance that could be provided. Thanks! Here...

Neither HD or Lowes could identify it. They referred me to a local plumbing supply store, but the guy there didn't know either. He was just sure it wasn't a Moen. Also, the only readable lettering on the cartridge is 12/06 (I assume the manufacturing date). Please help me identify this part so...