aio

I'm having an odd issue with my relatively new Katalox AIO filter. The filter does not have any water pressure when in service. When I flip from 'bypass' to 'service' the water pressure immediately plummets to zero. However, when I trigger the backwash cycle all 3 stages work and release water...

I'm updating my water supply system. Currently I have: Pleated Sediment Filter -> Water Softener The sediment filter doesn't generally capture too much, but I'm thinking it should be there anyway. Thoughts? I'm adding an AIO Catalytic Carbon filter primarily to remove potential VOC's (a few...

Hey yall, I right now have a softener and iron breaker, both clack ws1 from charger water treatment products. They are also both 1.5 cubic ft. I have a relatively large house with a family a 5 and I want to upgrade my iron filter from a 1.5 cubic ft 10x54, to a 2.5 cubic ft 13x54. The injector...

Update: After posting this. I found major issue in this setup. Please see my updated figure below. The issue is that the filtration loop was going nowhere. The diagram explains it best. Hello, Please bear with me as I explain the situation. It is very odd and I cannot find a resolution. I...

Hello all, I just had a new Kinetico Powerline PRO PF 1054 AIO iron filter installed. I was still getting a minor 10 second blast of sulfur smell from my cold taps in the house (not the hot ones, i.e. water heater rod is OK). It was installed before a new Hague Water Max softener. My readings...

Greetings everyone. I'm new to the forums. Just recently bought a house with well and septic, and the well has iron and manganese so I figure I better get learning. A well test was done before the title transferred and I bought and installed an AIO Katalox Light filtration system based on...