abs

I have a freestanding bathtub with ABS waste and overflow and I need help connecting a brass tailpiece to this. What kind of cement will bond with these two materials

Hello all, I've been pouring over the forums here and want to first thank everyone for contributing to these forums. I'm in the middle of a bathroom remodel have moved the shower and toilet to new locations. This is my home and I'm doing the work so before I close things up I wanted to post...

I'm having trouble locating any information related to code on side discharge shower drains such as: Infinity Drain: http://focalpointhardware.com/infinity-drain-clamp-down-series-cdiq-42-drain-p-10756.html) or QuickDrain USA: ( or EasyDrain I'm located in California. I'm moving a shower...

Am I allowed to glue ABS and PVC pipes together in Bloomingdale IL.

Do I have to replace the whole hub or there is another an easy and a reliable solution. Thanks!

Hoping someone can point me in the right direction. I am building my own house and am almost done all the plumbing. The only thing I cannot find (even from our plumbing supplier) is what is used as a final cap/valve with pressure guage to inflate the system to 5 psi for the pressure test. Am...

Hi Guys, I am about to install my P-trap and shower drain for a tile shower floor on concrete slab. I was hoping that someone could confirm it is Fine to install my P-Trap in this Orientation (sort of double backed) see pics. I have seen other threads on this but they all look different, so...

I tried to install a used american standard toilet into my new house from my old house that worked fine, but the horn is about 3.25in wide and the opening of the pipe in the flange is 3 in. What should I do? I was thinking one of two things: Buy a new toilet (probably upgrade to a Toto) Or...

I am in the process of building a tiny house on wheels and just had my plumber finish the drain line. Because we needed to achieve minimum slope downhill, my drain pipe ended up being a bit higher than I wanted. I know have very limited space to work with my kitchen sink. Here is a picture of...

I'm trying to connect a PVC bathroom sink trap to ABS drain pipe in the wall. The PVC is 1 1/4" and the drain is 1 1/2". So, I have a couple of questions--can I make this connection with a Fernco and do they have a transition size adapter or because it's flexible would 1 1/2" work and I could...

ETA: It is 4 inch coming into the house and at the T goes to 3" up the main. I'm replacing the CI cleanout in my house and after much jackhammering and digging I find this: I've attached a drawing. I'm wondering if the ABS with Ferncos I'm using will adjust for the angles? They sure didn't...

I am always stressing out when I am glueing large diameter ABS 3" and more. I realize I only have seconds to get it fully seated at the right twist. When I am glueing 2" and under, I have enough strength in my hands to push pieces together, and plenty of twist action. Sometimes I glue at the...