Search results

  1. Skeezix

    (Solved) One-Inch-Long 3/4-Inch Pipe Down Heater Vent

    While I was installing a new water heater, by accident I dropped a one-inch length of 3/4-inch copper pipe down the vent in the center of the heater (tinkle-tinkle-tinkle- thunk :(). I shined it on and completed the installation without removing the pipe. Will this cause any problems down the...
  2. Skeezix

    [Resolved] Strange Humming Right After Heater Burner Ignites

    Ever since I replaced my old water heater with a new AO Smith 40-gallon gas heater something makes a strange hum right about 5 to 10 seconds after the burner ignites. The hum is around 256 Hertz and does not vary in pitch. It increases in volume for 1 to 2 seconds, then tapers off and is gone...
  3. Skeezix

    Removing 15-Year-Old Flush-Mount 4-inch PVC Pipe Caps

    I have two 4-inch cleanouts both of which are capped with flush mount PVC caps. One of the caps has a slot in it that's about 1 to 2 inches long and 1/2 deep, the other has recessed hole that is about 1 or maybe 1.5 inch square. The caps are flush with the concrete that surrounds each. The caps...
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks