Search results

thanks for replying, I am still reviewing options , since most of the iron was deposited in tank I thought about iron out I don't think a filter would be necessary since new water coming in would be softened and clean when coming out of new tank

I have a home I only go to once a month had water checked and recommended regeneration tank only to clean up iron. I don't leave pump on while I'm gone. When I turn on regeneration tank I always have brown water in sinks and toilets closest to tank. Is this normal . Clears up after...

This is what it will. Look like when finished if I could get compression fitting to slide on 1 end then slide on other end after install and tighten would have to be able to slide thru fitting

This is what it will. Look like when finished if I could get compression fitting to slide on 1 end then slide on other end after install and tighten would have to be able to slide thru fitting. Can't load picture but would, be 1/2 inch gap

Its a 12 inch section of pipe I am adding a shut off valve with Barbed fittings each end of pipes cannot be moved I am cutting out section of pipe installing the valve if I measure tight I will have the 2 pipes butting together will a Fernco coupling be strong enough also ideally would be a...

I need to connect 2 pieces black plastic pipe 1 inch IPS is that butts together within 1/2 inch there is not enough room to move either way after installing

Would a filter between regeneration tank and house supply line help

Did last reply go thru

What about filter after after backwash before main to house ??

Hello, I have a part time home and have installed 2.5 cu ft acid neutralizer . The house sits for a month at a time. When I leave I turn it off as well as the water pump .(worried about leaks) when I return I push manual regenerate and backwash my problem is everytime i leave and comeback my...