Search results

This is for a new piping system to feed propane (LP) to a new gas stove in the State of Connecticut which is governed by International Residential Code 2015 (IRC 2015). According to "G2421.2 (410.2) MP Regulators": 5. A tee fitting with one opening capped or plugged shall be installed between...

So just to follow up, mission accomplished. The Dremmel did the job, cut the nut and pried it off with a screw driver. One thing to note, not hitting the stub threads is easier said than done. You know you hit the stub when sparks start flying everywhere. Unfortunately I went through part of the...

That is a fantastic idea, will pull out the dremel tonight - you get a gold star.

I should add there's not much room to work with to get a long wrench in there. I can try the vice grips but I don't know how much a 10" is going to wrap around that nut

So I'm replacing an old 1.5 sink drain pipe that's become brittle. My problem is that I can't unscrew the nut from the stub out in the wall. I only have about 2 inches to work with so it seems like cutting it off would just cause more problems. It is stuck real tight, I've tried penetrating oil...