Search results

Still leaks, Don't bother trying to fix these , part of the plan, keep consuming ******

Just installed, it appears slightly smaller, it works though. Will test tonight to confirm slow drip is gone by leaving a bowl under it overnight. It reversed direction for on and off though

Based on my measurements, the Temu is slightly off. Just ordered this one on amazon. I wonder if any heavy metals will leach out with the reverse osmosis softened water through this part?? Replacement Water Tap Cartridge Valve Core Copper Faucet Ceramic Disc Gland Brass Bathroom...

No still leaking, it's slow enough of a leak and I had other more pressing stuff to deal with.. (Franke sells a few versions of a Kitchen faucet with a separate filter handle.) Price reduced to $414. yikes.... not going there Just getting back to dealing with this problem, will check the...

Heard back from the seller. No parts, yer on yer own. 2.5 years out of it, the race to the bottom continues.........

That's the brand I have, thanks for the contact info. Was able to send an email, no response The reason for the faucet, the counter top is quartz and I do not want to drill any additional holes through it.

Any recommendations for a 3 way kitchen faucet(need a separate control for the filtered water) with a pull down spout that has parts available. I have a POS reverse osmosis under the sink

Thanks for the replies and advice. Here is a photo of the other side, the main hot cold control. Looks like an integral part of the faucet and not replaceable. I see what they say if a tell them I will review their product. $200 I expect more than a few years out of it Their contact us emails...

No way home depot gonna have this. I did find a company selling these faucets, I have contacted them. No reply yet https://shopwaterlux.com/collections/kitchen-faucets

Purchased Off amazon 3+years ago, WaterLux WL-301STS Stainless Steel Deluxe 3-Way Kitchen Faucet for Reverse Osmosis System Lead Free (so they say) Recently started leaking from the faucet. The paperwork had only install instructions, no trouble shooting repair etc...No manufacturer website or...

That's true, but who shifted all our manufacturing over there, follow the money......the uniparty

Thank you for the info, I tried vinegar, standing water just slightly less, however next few days it's about 1/2 of what it was from first install. Didn't get lucky after all, slight leak. Would this defect cause this, see photo. From what I've read the fix is to dry area, lightly sand, wipe...

I have two under mount bathroom sinks with overflow that I installed 5 years ago. They had standard pop up drains. I recently decided to go with clicker type drains. With one sink, the new drain leaked at the underneath tapered seal. Tried 2 other brands before realizing the bottom of the drain...

Municipal water, 13 grams of hardness Day override is already set to 30. RC is currently 195 So just lower RC to 120-130

Fleck 5600 SXT 10% cross linked resin 1.5 cubic feet. Family size changes have resulted in less water usage. What settings can be adjusted. Usage reduced from 195 gallons per day to 100. I can list current settings if it helps answering my question Thanks

From my web searching it looks like what is called salt mushing not bridging. Here’s one example “Salt mushing is when dissolved salt recrystallizes in the brine tank and clumps together to form granules. These granules usually collect at the bottom of the brine tank, where they can block the...

Yes to salt pellets already used, municipal water, no iron, just hard water. No rust at all My install manual says "it's not uncommon for water to be above the salt level as long as it'd not up to the overflow valve." Section 4.7

I think the tank had "salt mushing" from lack of maintenance. I use Morton or Diamond Crystal salt pellets from home depot, so I don't think it's from dirty salt. Cleaned the brine tank and did a manual regeneration. I also purchase AO Smith universal Softener cleaner and will add 16 oz that to...

Municipal water, Pentair tank, 18"x33" Round, hasn't been cleaned or stirred in about 2.5 years. There was about 2" of standing water on top of appx 7 inches of salt and sludge. The water was brown and the salt had a brownish tint. Just cleaned it all. Couple of questions, 1) Can I reuse...

So they’re sending a free replacement I’ll give it one more shot. Next time I’ll change out the valve body. And yes, poor design, where part of the valve blocks the shut off stops. I asked a GROHE rep about it, their response was” nope, too thin would make it harder to turn and strip out the slot.