Search results

  1. Dean M

    Ducane furnace not lighting. Draft inducer or pressure switch?

    OK, I have narrowed down my problem to the draft inducer motor or the pressure switch. Here is what I have tried: When I apply suction to the pressure switch the ignitor will glow and the furnace will light! How much suction is needed to operate the pressure switch correctly? Is it very...
  2. Dean M

    Ducane furnace still not lighting. No power where ignitor connects to smart valve.

    On Sept 28th I posted the following: Ducane Furnace model # MPGA07583A. When I turn on the thermostat the exhaust fan turns on for about 25 seconds then the unit shuts down. The error code blinks 3 times then hesitates then blinks again 3 times. The ignitor does not glow and the main fan...
  3. Dean M

    Ducane furnace will not light then shuts down

    Hello, I have a Ducane Furnace model # MPGA07583A. When I turn on the thermostat the exhaust fan turns on for about 25 seconds then the unit shuts down. The error code blinks 3 times then hesitates then blinks again 3 times. The igniter does not glow and the main fan does not turn on. Right...
  4. Dean M

    shallow sand point well problems

    About 9 years ago my father and I sunk a sandpoint well. We went down about 50 feet using 2" galvanized pipe. I installed a well x trol pressure tank model wx302 and a 1 h.p. standard Fairbanks Morse shallow well jet pump. we ran 1 1/2" pvc pipe into the galvanized pipe and connected to the...
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks