Search results

Hi Reach4... You're correct, it's not a reverse osmosis system. The filter housing is a GE Whole House unit (model # GXWH40L) and the filter is GE model FXHTC, which is a carbon spun fiber filter rated to remove sediment and chlorine taste . It's rated as a high flow unit.

Reach4 and Jadnashua... Thank you for your help. I set both the whole house filter and water softener to their bypass positions and the pressure drop went away. I replaced the water filter, turned the filter and softener back to their open positions and the water pressure is much better. It...

I need help... The water pressure at my daughter's townhouse measures 80 psi when nothing is open. If a sink is turned on, the pressure drops to 70 psi. If a faucet is turned on and a toilet is flushed, the pressure drops to 25 psi. She has city water (not on a well). There is a whole...

I hope this picture makes sense. I am trying to do a rough in for a kitchen sink in an island. The joists under the floor run perpendicular to the cabinets so I am not able to configure like the layout noted at the bottom of my note (Bert Polk's Pic). The pipe at on the left goes to the...

HJ, Hammerlane, Terry... Thank you for your quick response and excellent guidance. I used Terry's diagram (with santee's) when I did the original rough-in but I had someone who I thought knew plumbing review it before cementing everything together and he told me that the santee's should be...

I have just completed a rough-in for a double vanity. I hooked up a single vanity to one side to test it and it drains, but it's a little sluggish. If I let the water run for a couple of minutes the sink fills up and it'll take a minute or two to empty. The drain and vent pipes are both 1...