Search results

Do you know if I use the penetrating oil will make easy loosing the nut?

Here are the wrenches I used...

Thanks HJ. I found a clip similar to the one I have. From the video, it seems like not that difficult to do it (assuming using the right tools). Can you explain which part is difficult? Thanks

I took the pics again after attempting with a monkey wrench and a crescent wrench to show the current state of the nut. I think it's almost gone.. Any other suggestions?

I need to fix the leak from the shower head. I search on the web and I THINK it is a moen single handle type. I think it's similar (maybe the same) as this one https://terrylove.com/forums/showthread.php?25556-Shower-Faucet-Identification I saw some videos and a bit confused what/how...

Thanks Barry... I did try with a crescent wrench and in the way you described at the very beginning. I could not use a monkey wrench because the nut was too thin to be bit down for a monkey wrench. Any other tools? maybe a saw to cut it or just get a plumber and pay for it?

Ok..I see what you meant.. I tried to remove the nut from the other handle using the same deep socket and it seems to come off easily... So, I guess I stripped the nut when I was trying to remove it with an adjustable wrench. I did use WD-40 but it did not help. I tried again with both an...

thanks... But I am a bit confused now as to where to remove it. If I remove the remainder of plastic and use an adjustable wrench to remove the whole thing from the bottom (the closet thing to the bath tub), is it going to come off? Or I should only remove it from the but I put arrow in the...

Thanks for your help. I bought a 5/8 deep socket from the Home Depot and tried it. It did not come off. The socket seems a bit smaller (I felt like it almost fit but if I looked closely it was not). The nut was some damaged by me when I had tried to remove it with a wrench. Do you think it's due...

Hi.. I need to replace the stem from the leaking faucet that is installed on the bath tub. Pictures show how the faucet is installed. There is no access panel to it. I unscrewed the handle to remove it. Then I saw the stem covered with a steel cover with hard plastic (attached or glued together)...