Search results

I'm relatively new to wells, but have been reading about short cycling, and noticed my pump is only running ~20-25 seconds to refill the pressure tank. I don't have a lot of knowledge about my system, but I've detailed out what I can gather from labels below. Should first step be to drain the...

Just started a bath remodel that involves upsizing a tub (60"x30" to 72"x36"), removing a closet, and rotating a toilet into it's own space. Here is the old space - my dilemma is as we ripped open the floor, we found the joists running N-S instead of E-W as shown on the original plans...

I recently purchased a house that had a master bath remodel just 6 months back. On the surface, it looks like a quality job, but we started having some issues with the steam generator, which led me to find issues beneath the surface. I've corrected some of those issues (steam generator was...

I just received my 80K Fleck 5810SXT based softener. We're on a well with 30 GPG hardness, and use around 175 -200 gal/day. The softener has 2.5cu ft of Purolite C100E Softening Resin. BLFC .25, DLFC 4.0, injector: red. I'd appreciate if you could provide ideal settings. Would prefer to...

I recently installed a whole house carbon filter, which consists of a 13x54 tank, 2.5 cu ft of GAC and a Fleck 7000SXT head. Everything appears to be functioning correctly except I'm surprised by the noise produced when running through the backwash and rapid rinse cycles. Because of the volume...