Search results

  1. tedder

    Little help with pump motor

    Looks like it is....with this panel I don't see how a DP breaker could NOT have 220V...one leg of 110V from each bus. PS - Up and running fine on 220VAC. The key as you mentioned was leaving L1/L2 as is and just moving the violet and black internal wires. Appreciate your help
  2. tedder

    Little help with pump motor

    Thanks for this. Yes it's a DP breaker in the panel so 110V on each wire. Based on what you are telling me I believe the violet wire needs to move to terminal 3 and the black wire (going to motor and not the feed wire) needs to be moved to where the violet wire WAS. L1 and L2 remain where they...
  3. tedder

    Little help with pump motor

    Hey all. Nice place you have here. Attempting to switch this motor over from 110V to 220V for obvious reasons. Not sure why anyone would hook up a motor of this size (1HP) to 110V. Currently wired to panel to 15A single pole breaker on 14/2 copper. New 15A double pole breaker purchased for 220V...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks