Search results

4 acres of hilly terrain, house sits on hill, about 100ft higher than street. Main 1.5" water line from street goes to meter, then up to backflow preventer, then underground where it splits to 2 main circuits. One circuit feeds house and several perimeter sprinkler valves. The other circuit...

3 people, muni water, no iron/manganese, 16gpg, 1" supply line, 4 baths, no special shower/tub sprayers. I'm a fan of 2 tank systems, having installed a Fleck twinflo system at previous residence. Going with 9100SXT valve. The numbers work out to a 32K system, but a couple vendors have...

My 9100SXT twin tank install needs to be close to the wall. I found a 3/4" adapter for the 9100 here, unfortunately my supply line is 1". Would this work or does Fleck have a 1" 90 adapter?

With recent home purchase we inherited a LifeSource whole house water treatment system with sediment prefilter. Online reviews are widely spaced from wow to ugh. First order of business is the prefilter leaks, not from the canister seal, but from the bypass mechanism above it (pic). Called...

City water, 3/4 supply line to Watts N45B PRV, then to twin softener system, to pressure gauge on outbound side of softener. Perhaps once every day or 2 I'll notice the pressure gauge at ~ 90psi. Opening a nearby faucet will bring the pressure down to the regulated 60psi level. I have two...

I installed a Fleck Twinpro 100 series (dual 8"x44" tanks) softener with brine tank about 4yrs ago. At the time I upgraded to 10% crosslinked resin to deal with the city water 1.5ppm free chlorine. My HM digital TDS meter says the city water is approx 440ppm and the softened water is about...