Search results

I have a shallow well being fed from a spring. We had the water tested and it is clean (just hard). We want to use this source of water as an alternative to the sulfur well that is currently running to the house. The well is approximately 6 feet deep and has a quick recovery rate. I pulled (10)...

Had some problems with a peroxide injection system / catalytic carbon filtration system for a well with high sulfur content. I replaced the carbon media and it ran about 2 days before the smell returned. Found out late tonight, peroxide was not being injected into the static mixer. Got it fixed...

I had posted earlier this year about sulfur problems with a recently drilled well. We are now without water due to the sulfur contamination and desperately looking for help / advice. Here's what we've done: July 2011 - New home, city water not available, well drilled, ran for 3 days out of...

Some of you may have read my post about the sulfur situation. I bought a LaMotte sulfur test kit and it is between 18 - 20ppm at the well and 5ppm at the faucet after going through peroxide and carbon. My wife and I have about decided to go a separate route, because we're afraid the high sulfur...

Just found this forum and hoping some of you experts can help me. The basics: Bought a mobile home in July 2011, no city water available, so we had well drilled. Immediately, we had very strong sulfur content 10+ ppm. The well driller installed a pressure tank and we ran a hose out of it and...