Search results

Now that I'm half way into a basement finish, I was thinking how nice it would be to have a slop sink down there during construction (hind sight is 20/20, i know). I have a vertical stack that comes down a basement wall where I would like to add a sink. It serves the washing machine and sink...

Thank you sir! As a follow up to verify, the horizontal portion of the "green" vent in my pic needs to be at least 6" above flood level of the sink it's serving, correct?

I'm roughing in a basement bath and bar area that will share a 2" vertical drain out to the street. I'm wondering what is a proper venting strategy using Studor vents. In the pic attached is idea 1, which uses a single vent that i will hide in a wall in an accessible box. Basically the bar...

Ah yes, didn't specify what that was in my write up. The white line is what I'm 99% sure is under the slab. This is in a new sub, and I've seen what other houses of the same model as mine have laid before the basement was poured. I'm prepared for a large hole to be banged out to possibly push...

Thank you very much Terry! I do have to vents to the roof, all the fixture on the 2nd floor are vented that way. In my 1st floor bath, the AAV's are right after the trap under the sink before entering the wall, so I assume that's what would happen in my instance. Just out of curiosity, if two...

Ok then don't be gentle, be hostile I guess. Figured if I'm going to plunk down a couple grand to have someone do the work for me, I'd rather not find out after the fact that they did it wrong, hence my interest on how it *should* be done, which your reply provided nothing of the sort. I wasn't...

Hello all, I'm a novice when it comes to plumbing, so I want to ask the "proper" method for routing my drains in an upcoming basement bath install. I'd like to be armed with information before calling plumbers to have this done. Below is a picture of my intended layout, which is to be a...

Oh, forgot to mention that the exit part of the trap was different than in all the pictures too. On both Cadets, there was no little "hump" before exiting, it made that flat almost 90 horizontally across the floor to the exit, just like all the other cheapos. The display model at the store had...

Had to create and account to reply to this thread, since I've been lurking here for months and decided to go to the 'Depot to pick up a couple Cadets to replace the builder grade Mansfields in my house. Wow, the quality control issues were not exaggerated. Both bowls with cock-eyed just like the...