Search results

It's a Franklin turf boss FTB15CI 1.5 HP Would I be better of with one check valve or two foot valves? I'm running about 6 to 8 heads per zone. So I only need around 30 to 40 gpm. I would like to move the pump closer to the house if possible, but obviously still need my sprinkler...

I guess I'm doing a decorative rock. My pump chart says, if I'm reading it right at 70ft at 68gpm. Do you have any comment about the two foot valves, can you pull from two wells at once? What is a check valve? If suction is mainly horizontal instead of vertical, does that matter? Thanks

Hi, I live in a low ground water. Most wells around here are about 10 feet. I was going to use a submersible for my sprinkler, but decided that was the wrong application. I have drilled two wells(don't ask why,that's another story) I purchased a 1 1/2 hp irrigation pump. I planned on using...

Hi, My well is only about 15 feet down. The length to my power is only about 150ft from my house. I will be using pvc conduit. The question I'm wondering is can I use the standard 12guage wire that is in big bundles that you also use in house wiring? The next question is about pressure...

Hi, I have a 10 foot well and only 4 feet of water that is consistant. All my neighbors have external high pressure pumps that work fine, but I wanted to use a submersible pump. I'm a little worried about the water level and the heat. I would like to use a inducing sleeve. My well is 6...

I'm pumping from a Well. Every year at the first of May they release the water for irrigation. My well only needs to be about 10 feet deep. All my neighbors have external pumps for their yards and work fine, however, someone mentioned the submersible pump. Maybe I'm not looking right, but...

Hi, I have about an acre of grass that I'll be watering with around 4 to 6 rotors per zone. Probably around 4gpm per head. I had someone tell me that the only way to go with wells is a submersible pump. You dont' have to worry about covering them, winterizing them, and less maintanance with...