Search results

Great information thanks, i will send you an email shortly. ive done a cursory search for the resin and distributor tubes do you have a favorite vendors? Are the distributor tubes "standard" and not proprietary to kinetico? ( i just cur them to the length i need? Thanks, ill go with a known...

Hadn't had a real salt spike in a while, but got one the other day. But now i also suspect that one tank resin is almost not working at all. So its time to rebed the tanks. I just spoke with a local kinetico tech guy. He said this model 60 take .4 cubic foot of standard mesh resin (per tank)...

Thanks very much ! Ill take a look, there is and electrical supply house up the road. My biggest concern is that this is safe. As it is, the power comes from the panel and runs to a GFI outlet, form there it runs to a and then to the light. Plan would be to put the transformer in line between...

Have and old pool light that has been leaking and throwing the GFI. It runs off of normal household current and is wired as such. Ive decided to change over to LED and have found a good sealed unit, but i need a transformer. this is what i need as told to me by the sellar of the light: "The...

I have a kinetico model 60 from about 98, ive had it a couple years( i go it free form someone moving out of a house). 6 months ago it wasn't cycling correctly and i discovered stripped gears in the head. It was rebuilt bu Kinetico. Working fine until recently when more often than not, after a...

Where do i check/see what the salt setting is set to on this Model 60? Is there anything else i should check while the control head is apart? seals/parts/clogs etc? I am also curious IF anyone can identify exactly how old this unit is by serial number. The reason i ask is this, if it is in...

Where is the best place to find the #3 disk? It appears to be pretty easy to change out, is it under tension at all?

I can see a "water meter" wheel in the control head, it has a #2 on opposite sides , those are the only numbers i can see so i presume then it is a #2 disk. So the question is, how, does that affect the softness level of the water coming out of the unit. I wont be able to get a resin sample...

Since the unit was originally sold in this area i would guess the disk is correct, but that said it is 12 + years old, maybe something has changed in the water since then, but AFAIK the water has always been very hard here. Can i tell which disk is there from looking in through the top of the...

Im in Arizona, just south east of Phoenix( Gilbert) . A little background Ive had a Kinetico Model 60 on the house for a couple years. A friend gave it to me when he moved out of his house and didn't want to take it with him. I would guess that it is about 12-14 years old, but it is virtually...

Have the unit set-up but i want to make sure i hookup the brine draw and drain line to the correct connection. looking at the unit from the front( assume main feed is pointed away from you) the drain plug is on the left and the brine draw is somewhat on the front?

I ended up calling the local kinetico service center expecting to get a run around. He told me up front that the O rings have an ID of 1 1/8 and an OD of 1 3/8. Said if i couldn't find them to come on by he had them for .60 each to which i responded, "ill be right over". When i got there, he...

it will be connected to city water.

should i sanitize the tanks for a model 60 wherein the water sat for about 2 months prior to be disconnected form the feed? The was no water movement through the tanks during that time. If so, what is the best method?

thats what i thought, just wanted to make sure there was not some sort of "specialized" or proprietary O ring for kineticos

Picked up a model 60 from a friend for free. Its been in his home for about 6 years, is moving to a place with one already in it. Anyway, when i took it apart there are a total of 12 "O" rings that i am going to replace. these are the ones on the pieces that hold the two tanks together and...