Search results

  1. Sdradius

    How to Plug old In-Wall Condensate Drain?

    We recently upgraded our HVAC system and installed a condensate pump. The old condensate drain went into the drywall down through the slab and then outside. After cutting off the bend, I have a very short protrusion from the drywall. A 1/2" PVC plug seems like it should be the right size but I...
  2. Sdradius

    10" Rough in Toilet

    It will fit. My remodeler was also concerned about the rought-in but it went down just fine.
  3. Sdradius

    BioBidet very noisy fill cycle?

    The source of the noise was the included 3/8" to 1/2" adapter that connects to the 3-way valve. We swapped out the 3/8" angle stop and put in a 1/2" angle stop and the noise is gone. Thanks for the suggestions!
  4. Sdradius

    BioBidet very noisy fill cycle?

    I just checked that.... It's definitely open all the way. Maybe something with the new angle stop and the connection to the bidet hardware?
  5. Sdradius

    BioBidet very noisy fill cycle?

    I have a new BB-1000 and after a flush, the fill cycle is VERY noisy. Sometimes it happens the whole time the tank is filling. Other times, I can only hear the toilet tank filling for the first half and then the noise starts. Maybe something is loose or the filter needs a break-in period? I can...
  6. Sdradius

    11" rough-in

    And Terry is correct. Thank you very much!! The Drake fit just fine with the 11 3/8" rough-in. The installer said it was tight, but worked, and there's plenty of space to the wall. There's actually more space to the wall than with the previous toilet. So if anyone has a 11 3/8" rough-in and is...
  7. Sdradius

    Bio Bidet BB-1000 vs COCO 6035R

    Has anyone had experience with both the BB-1000 and the Coco 6035? The Washlet is too expensive so I've narrowed it down to the Bio-Bidet and Coco. I haven't seen many reviews of the Coco yet. Thanks!
  8. Sdradius

    11" rough-in

    Thanks Terry. I'm also considering the UltraMax. You had said elsewhere the UltraMax requires a 11 1/4" rough-in. Does that mean with a 11/4" rough-in, the tank would actually be touching the wall? Thanks again!
  9. Sdradius

    11" rough-in

    Thanks Terry! Do you know if I can find a PDF somewhere that says that? It would help me to prove that it will fit.
  10. Sdradius

    11" rough-in

    11 3/8" Rough-In? I have a 11 3/8" rough-in. I would go with the CST744SF.10 but it only comes in universal height and I prefer it lower. So the Drake will work with a 11 3/8" rough-in? My remodeler is concerned about the fit. Do the CST743S and the CST744S both require the same amount...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks