Search results

  1. LA1

    Electrical Trouble with Bryant furnace

    Had a power surge. Its a Bryant 310A. The fuse was blown FU1 on the PCB, which might be for 24vac?, installed another, applied power and the LED blinked about 3 times and the fuse blew again. disconnected everything from the PCB. Removed the blown fuse and checked across the contacts no short...
  2. LA1

    Barand shower faucet

    As I stated earlier my Barand shower drips too, I just found out on mine at least, the lever in jpg 003, the one below the temp control when in the down position like in your picture appears to turn off all water going to the unit...no more drips. If I turn the lever CCW 90° the water is on. If...
  3. LA1

    Barand shower faucet

    I have the same. I also have a wand over on the wall that has a through tile on/off is causing a drip same with the on /off with the shower. At the moment not too bad. to be prepared I want to know what my options are if it get worse. How does the handle come off the valve ? if there is not a...
  4. LA1

    Water temperature mixer in shower

    This is what I have...found this manual in a cabinet ...here is the exploded view ...here are the instructions In the instructions it says to turn off the check valves. can they be accessed from the back.. what does a check valve do and what are the symptoms of a bad check valve?
  5. LA1

    Water temperature mixer in shower

    Not quite sure what exactly you mean about dissasembling. I thought that if I took the knobs off followed by the "tumbler" style temp dial I could remove the plate. I removed both of the knobs. The temp dialer seems to be integrated into the assembly with no visable way to remove the tumbler...
  6. LA1

    Water temperature mixer in shower

    See picture below...as of late, when the temp dial is set on hot ( 100° ), half the volume of water comes out as when on cold. Until I discovered this I thought that we were suffering from low water pressure. We also have a hand held sprayer on the other wall that is affected too. The water...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks