Search results

Hi guys... Hopefully someone knowledgeable about water tanks will chime in and help me. I have a low producing well, so I am starting to supplement having water hauled in to me. Im looking for a water trailer, so I can haul water in myself. I found a guy that has a trailer with a 500 gallon...

I believe it is full yes. How would you troubleshoot a pumptec problem?

I got a low yield well (.5 gallon a min). We are using a 2500 gallon storage tank. We also have a Pumptec system to protect our pump in the well. The last several days, ive had a solid yellow light on my pumptec (underload). The funny thing is, the 2500 gallon storage tank is full. If I turn...

There are 3 wires... Black, white and green. I have the green installed to the round middle prong. Thats right isnt it? I plan to seal the hole... that isnt a problem. I may look into a wall plate / seperate outlet as well.

I installed new internet service at our house. My wife wants the modem, wireless access point and cables in the closet. The closet has no electrical plug. The exterior closet wall does have an outlet. So I drilled a 7/16 inch hole through the closet - cut off the end of a surge protector, bought...

Here are more pics. Better?

What would you like to see, and ill get you more pics.

If you look at the last picture... the only piece that could possibly be a lever is that metal stick looking thing at the bottom of the picture. Last night my wife ran a bath, and we didnt lose water pressure! This is getting fustrating. Im not even sure why we have the goulds pump if we have a...

Pics are attached. Sorry low quality - its all I could get. Hopefully this will help!

Ill get you a picture when I get home tonight! Can I PM or email them to you?

I didnt have to hold it... as soon as the ends made contact it turned the jet Pump on. So... possibly the new pressure tank was not installed correctly? Or?? What do I need to do to fix it?

It did look like there was a metal lever... but i coulnt get it to move. So i assumed it was a gaurd to protect the switch or something. To get it started I just push the connectors together so they make contact.

Im not sure - I didnt see a label or anything on it. All I know is it has a grey protective plastic cover with 1 nut holding the cover on it.

Update: Tonight my wife ran a bath and it did it again... I did not run any other water though. So it when she runs a bath that it trips the switch on the Jet Pump.

Hi, I am new to plumbing and well equipment, so I am going to try to explain this as best as I can. We just bought this house, so I am learning all its equipment. We have a well that pumps water into a 2500 gallon storage tank. We have a 40 gallon pressure tank. We also have a Goulds "Jet...

I was told 100 gallons per day per person is the new usage statistic. Its a 6 in well. I dont know the water level. All I know is the inspector totally drained the well - doing calculations every 10 min or so on water depth. He then let the well fill back up and checked it every 10 min for an...

Hi, We are buying a house that is on a well. The well was drilled in 1996 to 300 feet deep - it was producing 3-5 gallons per min. The well was then deepened in 2001 to 600 feet and it was producing 1-2 gallons per min (according to the papers I got from the New Mexico State Engineers...

From the water heater back to the presure tank and softner is a black steel pipe. Same pipe from stock tank as well. It is on a 2000 gallon stock tank. Thanks for the PB advice. Ive heard a lot of bad opinions on PB which makes me eery!

Its like a dark grey in color, so I am assuming it is PB. I thought PEX was clear or blue...

Hi, We are in the process of buying a manufactured home that was built in 1996. It has never been moved, excepted when installed at the current location. After looking around, I see it has poly plumbing with copper crimps. It is on well walter with a water softner. Should I get it...