Search results

  1. pmetiv

    Shower Arm Diverter - Pressure issue?

    Makes sense. I guess I need to test it now. Thanks!
  2. pmetiv

    30 X 60 Tub - Anything Besides Villager or Princeton?

    We had the same issue and went with the villager. It's probably a better bet then the Princeton since the shape is a bit more interesting. If you don't mind having it a bit higher, the Kohler Hourglass comes in 30x60 but is 17in high....it is lower then most Acrylic tub which normally go for...
  3. pmetiv

    Shower Arm Diverter - Pressure issue?

    I understand the regulation and already have it on my showerhead and handshower. But why does it need to be on the diverter too?! So far I only saw the Danco but this is molded in brass. There's no way to remove it like you would with a plastic piece. I guess I need to test it but wouldn't...
  4. pmetiv

    Shower Arm Diverter - Pressure issue?

    I want to install a diverter at the shower arm to use a handshower. I have been looking for a while and found brands like Hansgrohe and Danze who sell them for $30 to $50 :(. While at HD today I saw a Danco for $15 :). When looking at it closer, only a small water access is...
  5. pmetiv

    Shower Diverter on Valve Trim or Spout?

    Thanks for your reply Jim. I read on the forum that if the water pressure is very strong (my case), water could go up to the showerhead even if it's directed at the spout. I wouldn't want that! Anybody seen that before?
  6. pmetiv

    Shower Diverter on Valve Trim or Spout?

    This is my first post on this forum but have been reading it for a few years. Lots of good advices on here! Thanks! I want to install a valve trim (Grohe: 19 494 000) which as the diverter at the valve trim instead of at the spout. Is this a bad choice? We have very good water pressure...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks