Search results

Need to remove my tub spout (for new surround). Tried turning it counterclockwise to unthread it but it didn't budge. Do I need to use a strap wrench, perhaps, or could there be a locking screw hidden that needs to be loosened first? Faucet assembly is Delta or Moen. Thanks, guys!

You guys have given me such good advice, I'm back for more. Hopefully you haven't been asked this a million times before. I raised my existing floor (concrete slab) 2" higher to insulate it, using 2"x4" sleepers and plywood. Problem is, the closet flange of my powderoom toilet is now 2"...

I cut holes in my kitchen soffit :( to determine the source of a very minimal water leak and discovered the joint of the ABS closet flange and the 3" diam. Schedule 40 waste pipe is leaking. (You can see a photo here ...which shows the mineral build up at that joint, visually confirming...

I have a toilet closet flange that is leaking at the first joint where it's cemented to the waste pipe. I'm pretty sure of this because I examined it from below and it looks like the leak is definitely originating from the joint, not above it (for example, at the wax ring). The closet flange...

What's the easiest way to fix a closet-flange bolt that turns? If I install the toilet and try to tighten the two nuts that secure it to the closet flange, I can't because the bolt turns when I turn the nuts. The closet flange (and drain pipe) are black plastic (ABS?). Is there a repair kit I...