Search results

Thanks in advance for all suggestions. I have 2 separate irrigation systems watering 5 acres. Originally 1 system irrigated from the well and the 2nd system around the house was on city water because of the rust from the well staining the house and cars. I started pumping the well water into the...

Valveman....thank you for this information.

Thank you Valveman. Since the Cycle Sensor is not available for the 3 HP, do have a recommendation for one?

Thank you Valveman for the reply. I have been looking at different devices. I have seen some devices that have water flowing through them and switches off when the water stops flowing. Are these reliable?

Reach4....thank you

When I pull up Cycle Stop Inc. it shows the sensor for 1/3hp-2hp. Is a 3hp-15hp available from Cycle Stop Inc? I found one on eBay but prefer not to buy this product off eBay.

Looking for best company to buy 1PH3-15 HP Cycle Sensor. Thanks for any recommendations.

Valveman...thank you for the reply. I don't understand how the water supply works. If my neighbors are also pumping 180 feet, should they not have the same problem?

Reach4....thank you

Thank you Reach4 for your reply. Since I use this well to fill the pond only, and cycling is not an issue, water is pumped straight to the pond. I am looking at the Cycle Sensor to protect the pump from a dry run. Will this device work by installing it between the control box and pump without...

Hi....I have a well that is used only for filling the pond that is used for irrigation. I have been using the existing well since 2008. The rust is bad so the pumps only last for around 3 years. I measured the levels about 10 yrs ago. The water was at 100 feet and the bottom was 230 feet and the...