Search results

I have approx. 440 LF of 5/16 pex for radiant heat . It looks like it won’t be more than 5000 BTU . The house is about 2600 SQ ft

I got it , maybe this will help i got it , maybe this will help .

I have : -one zone for radiant only 5/16” pex approx 7000 BTU split to two loops with uponor manifolds, - one zone for water heater - and two zones for hydro air (one for each floor) I tried to upload pics but is to large for website.

My nozzle is .85x60*W ,air setting 2.75 head 1 ,I’m currently burning 6,7 gallons a day - I think that’s too much.

The furnace turns on when the temperature drops to 135F

130F furnace temperature ? Sims too low . My current temperature set on furnace is about 180F

This is a two story home . The fan coil unit max temp. is 180F

Yes I have taco mixing valve set for 100F

Hello. can anyone help me setup my home boiler . I have Biasi SG-4 with riello 40 f5 burner , indirect hw Vaughn Top performer Plus 50 gal , two fan coil units First Co 36HBXB-HW( max heating BTU at 140F - 51,100 each unit), radiant floor heat for room size 12’x16’ - so is total four zones ...