Search results

@nmarolf is your bathroom in a workable state yet? Curious to know how the tub is performing using that "shower only" diverter valve; does it seem to fill up as fast as the old tub it replaced?

Thanks all! This helped me to locate the Uponor pipe support as mentioned above which I can source from a local shop and should make running between beams in the crawlspace very easy. I haven't finalized support method yet but I'm leaning towards the double J-hooks to have an easy time with the...

breplum the Uponor support channel I know about, and I know they sell all sorts of sizes including 1/2" and 3/4" (and recently i've found that Ferguson carries it which they have a number of branches close to me). Uponor F7040500 (for 1/2"). I'm leaning towards using that and the double-sided...

John, do you have links to anything specific in the trays? I know what all thread is, but I'm not sure the proper terminology to search for and "all thread pex tray" (or "support") returns a massive variety of options that don't look correct EDIT: Sammies look to basically be a screw with a...

My floor construction looks like the above image. Large beams (4x8 in my case) running the length of the house, 2x6 T&G subfloor running perpendicular to that, no joists. All current plumbing is ran below the beams, nothing through. I plan to continue this practice. When running PEX piping...

Thanks, Wayne, appreciate it! The feedback on the low heel inlet quarter bend is good, saves me having to glue up one extra connection when using the bushing. The wet vent option I didn’t do, partly because I’m not a plumber and it’s easier to understand a dry vent versus the nuances of a wet...

Going through this because the bid we got from any local plumbers was over twice what we were expecting, so I'm buckling down and taking this on myself. I have no concerns over the actual work but want to ensure I've laid everything out properly. Current DWV is all cast iron. I'm planning to...