Search results

Thank you!

I have the Rigid coupling remover and 1/2 inch compression puller so I believe I have the tools needed for this, but would like to hear from experts before attempting. Thanks.

All of the toilets in my house have PEX stub outs and angle stops like the one pictured. This is a compression fitting- so I should be able to remove the nut and ferrule and not have to cut the pex, correct? Never done this before so looking for any pointers in dealing with this repair.

Thank you.

Thank you- it is the Double Union type. I will keep doing a weekly check and replace it if need be. Thank you again for your advice.

First off let me say thank you for your advice. I do appreciate it. The bib is after the PRV. I had a Culligan tech in and we did a pressure test. The pressure dropped about 15 to 20 psi when we turned on a faucet in the house. He said that indicated possible PRV failure, that turning on one...

My home has a 1-1/4 inch Zurn Wilkins water pressure regulator that sits on top of the main incoming water line. I had a plumber out to do some work and he tested my home PSI at about 95. He recommended a new unit and quoted a price at $500. I wanted to get a few bids and verify the situation so...