Search results

Got it, thanks

I do have a submersible well pump, what vent fitting are you referring to?

I have a 12x52 tank with only 1.5cuft of media and some gravel base, I’m not sure how to figure out the exact required backwash flow/ desired expansion based on that tank size, only 1.5cuft of media, 30c water temp. I have a black tank that light does not penetrate well at all so I can’t see the...

Thank you for the reply, I checked the rate of backwash and it is almost right on 10gpm. Your point about the warmer water and backwash rate is noted so I’ve ordered a 15gmp dlfc, with all I’ve read katalox must be backwashed appropriately to function as intended. Do you know the ideal bed...

I could really use some advice, I recently switch from a chlorine system to a Katalox system with ozone injection (eog), softener, and carbon backwash filter. I have sulfates and tannins in the water still and was thinking of replacing my softener resin (7 years old) with new mixed bed resin...

Hello, I have been searching for an answer to my problem: I am on well water and i switched from a chlorine injection system with a 120gallon holding tank and a 1.5cuft carbon filter, and a softener to…. a Katalox 1.5cuft media in a 12x52 tank with Ozone, to the carbon filter then softener. I...