Search results

  1. T

    Compression 1/4 turn shutoff drip stopped itself - should I still tighten it?

    It is not 100% leak free. After every few hours when I touch it i feel a very small drop. I thought I tried my best to tighten it as much as I can but I will try again for another 1/8 turn. Should the threads completely screw in?
  2. T

    Compression 1/4 turn shutoff drip stopped itself - should I still tighten it?

    It is not 100% leak free. After every few hours when I touch it i feel a very small drop. I thought I tried my best to tighten it as much as I can but I will try again for another 1/8 turn. Should the threads completely screw in?
  3. T

    Compression 1/4 turn shutoff drip stopped itself - should I still tighten it?

    I installed a couple of quarter turn compression shutoff valves. Hot side was ok. The cold side had a very small drip - like 1 drip every hour and then the next day it slowed further. But I do feel very small leak when I touch it. I removed it and installed it again with a new valve. Same...
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks