Search results

I have tried flushing several times. I have tried several cartridges, still no flow through this valve. I feel like it must be a pressure equilibrium issue. I don’t have valves on my lines near the shower but about to go put some in and test. I have reached out to delta and they gave me some...

Replaced valve body and new delta classic kit from Home Depot. RP46074 cartridge issues. I cannot seem to get any pressure through the cartridge. I have plenty of pressure when I remove the cart. Tried reversing the cartridge. Still no pressure. I have done many of these valves before and...

First time I took out cartridge I found little pieces of sediment that I cleared. Put it back no change, I blew it out for 30-45 seconds and got hot and cold water. Then put cartridge back in and same result. Its hot and cold correctly so it’s not a case of switched pipes, just no pressure. As I...

So I replaced with all new delta kit and still don’t have enough pressure for the hot water at the shower. I have plenty of pressure on the vanity that shares the same hot supply. I’m very frustrated. What am I missing?

Yeah I feel like idiot for not replacing when I had wall open. I was trying to not have to spend the extra money on new valve but went ahead and did it anyways now. At least the tile is cheap to repair and it was only time and pain and suffering from the wife. As far as the cut threads; It was...

I had already put back tile as I had checked for leaks and didn’t realize I was not getting hot water. So I’m trying to avoid going back through tile to replace whole valve body.

Almost finished with 600 series cold side leak above the shower in attic leaking down pipe. I already replaced with PEX and shark bite. Put everything back together and hot water is clogged. RP50 cap was Calcified shut so I cut off so I wouldn’t damage mixing valve body. Question is this...