Search results

Hello again Wayne, I was able to dry fit the parts together and everything looks like it will work in what I have in the black rectangle in the illustration. During the dry fitting I discovered my Main vent location will interfere with a recessed medicine cabinet. I can get around that by...

Thank you Wayne! That makes perfect sense to me now. I'm going to go buy some parts and dry fit together. Thank you, Zach

Hi Wayne, I think I understand what you are saying and it makes good sense. The other bathroom LAV drain was only 1.5", so what if I used the main vent as the Wall Hung WC vent in this bathroom and use this bathroom's LAV to vent the other one like you were saying? It would look roughly like...

Hi Wayne, Thank you for your help and patience. That is indeed my main 3" vent and happens to be in the only place a toilet will fit in this small bathroom. If I move the 3" vent over, it looks like there may be an option for me that will work in the space. I'll need to move some of the 2...

Hi Wayne, I really apperciate your replies. The illustrations were helpful, but I'm not 100% sure on this. This attached seems like it should work. Increase the drain size on the LAV in the bathroom to 2", like you are saying. Change out the sanitary tee on it's back at the LAV to a combo...

Wayne, Thank you again for the detailed responses. I'm going to take all this in and create a new rendering hopefully in a day or so. I went ahead and took a panoramic picture to show the entire existing plumbing for reference. From left to right for the current venting. 1-1/2 vent from the...

Hello Wayne, Thank you again for your reply. You are correct, I did not want to mess with the other bathroom at this time so I would like to fix the toilet plumbing issue from this side while I fix the drain for the new linear drain. For that missing 2nd question - It was to ask about moving...

Update and Feedback/Suggestions Apperciated I took out all of the drywall and cut away the subfloor to expose the rest of the plumbing. It looks like I'll need to remove all of the drain system in this bathroom. The sink drain goes into a sanitary tee on it's back. The back to back toliets go...

Thank you again, Wayne. I appericate the help. I was so focused on getting the drain to the wall, I wasn't thinking that the main drain may have an issue. I'm going to go pick up a combo and see where it will fit in the space. I'll put an update here when I make some progress. Thanks, Zach

Hi Wayne, Thank you for the reply! I did have that part facing the wrong way in my illustration, but it looks to be a 3 x 3 x 2 san-tee on it's back. I was able to take a photo of the current setup. Thanks, Zach

Hello, Thank you in advance for any feedback. I'm replacing an existing shower and moving the center drain to a linear drain against a wall. This shower is back-to-back with a tub/shower in the other room. The current center drain is connected into a Double Sanitary Tee Hub. I was going to go...

Hi Smooky, Thank you for the reply. I just checked the stops on that sink, and they are turned all the way on.

We are in the middle of installing a new tub. The tub install required a new tub/shower valve height. It is about 10.5" higher up than the old install to make room for the new taller tub. The hot and cold line come straight from the basement, and feed this bathroom, and an adjacent bathroom...