Search results

I know ChatGPT can often get things wrong, but for what it's worth here is my exchange. Regarding point #1, I don't believe my faucet has a mixing valve - at least I don't see one on the parts diagram. By process of elimination, out of the four possible causes listed, #3 (faulty cartridge) seems...

Just got off the phone with AS. They are sending me a mounting kit for my faucet as a "courtesy one-time favor" because I haven't found our receipt yet. I explained multiple times that the fixation ring and three screws that secure it to the underside of the sink appear to be tight and there is...

Thanks a bunch for checking this out. Yes those three screws are already tightened - I even torqued them down a lttle more. That mounting plate is solidly fastened down under the sink but the faucet itself is still loose, as my video shows. It might not be obvious but that threaded column does...

I did not know that! Thanks very much, you might have just saved us the cost of a new faucet!

No bites I see... maybe this is too dumb a Q for anyone to bother with! Just a little more info, this is an American Standard Fairbury faucet, discontinued. I thought it might be one of those cheap Chinese guys I see on Ebay for $30 as it was installed by a contractor fixing our house afer a...

DIYer here. I probably do need a new faucet but I thought I'd make sure first. There are two problems. First, it's loose. I went under the sink and tightened the three screws underneath VERY tight - it made no difference at all. Below is a short unlisted youtube vid I made showing that the...