Search results

thank you Wayne :) I attached an image of what it used to look like. I think the previous homeowner/installer did that because the fibre glass tub drain location is offset from the drain at the tee, but i don't know...? As for the P-trap for the shower drain, i'm thinking it's buried down...

Good morning Breplum, thanks for your response! I looked up the NPC used in Canada and they allow a minimum shower drain of 1.5" if you use only 1 head/conform to certain flow rate requirement in the newer codes. I agree with you that upsizing everything to 2" is the best way to go, i don't...

We are at the stage where we're shopping around for a shower drain, and learning that most the shower drains are 2" or 3". Our existing shower drain is 1.5" at the sanitary tee. The tee is 1.5" female on all 3 sides; I attached a close up image. Is there a sanitary tee i could purchase, which...

Hi all, For the shower, it's hard to see with the resolution but it seems like the previous installer had use what looks like an S trap to get to the vertical drain, but I think it is because the plastic shower pan drain location did not line up with the vertical drain. The vertical drain has a...